Archive for Nickel Welding

Welding Forum Started

Forum


Forum

Forum

$30

Welding


Welding

No Synopsis Available

$11.64

Welding Forum Started Today here at http://www.martin-welding.com/forum/.  Just doing a test post to my new twitter account at http://twitter.com/martinwelding/  via tweet my blog.  In the forum we would like to have all of the following categories

and more.  please help start off our forum with a posted question or even a statement.  Memberships are free……..

Welding Forum Open

New Welding Forum Opened Today

9% Nickel Welding

Chromium, Nickel and Welding


Chromium, Nickel and Welding

Evaluates the carcinogenic risk to humans posed by industrial exposure to chromium and its compounds; nickel and its compounds; and welding fumes and gases. Occupational exposures, principally by inhalation, are noted to affect about three million workers worldwide. The first and most extensive monograph evaluates the carcinogenicity of chromium and its compounds. The monograph is divided into subsections based on the oxidation state and solubility of the compounds, with separate evaluations made for metallic chromium, chromium [III] compounds, chromium [VI] compounds, and for a fourth group of tested agents that were of mixed or unknown oxidation states. The most extensive sections evaluate the design and findings of over 500 investigations of carcinogenicity in animals and experimental systems, studies of metabolic fate in animals and humans, and case reports and epidemiological studies in human populations. On the basis of this evaluation, the monograph concludes that chromium [VI] is carcinogenic to humans. The carcinogenicity of chromium [III] and of metallic chromium could not be determined on the basis of available evidence.The second monograph presents similar information for metallic nickel and nickel alloys, nickel oxides, and hydroxides, nickel sulfides, nickel salts, and other nickel compounds. Nickel carbonyl is identified as the most acutely toxic nickel compound, causing severe damage to the respiratory system in experimental animals and in humans. The evaluation concludes that nickel compounds are carcinogenic to humans and that metallic nickel is possibly carcinogenic to humans.The final monograph evaluates the carcinogenic risk posed by exposure to welding gases and fumes. On the basis of evidence from human and animal studies, welding fumes are classified as possibly carcinogenic to humans.

$92.5

9 Welding Locking Clamp


9 Welding Locking Clamp

9″ Welding Locking Clamp

$32.2

9 Locking Welding Clamp


9 Locking Welding Clamp

9″ Locking Welding Clamp

$36.46

Steinel 09311 Lathe for Heat Gun Welding


Steinel 09311 Lathe for Heat Gun Welding

FeaturesSteinel Lathe .For use during heat gun welding.This accessory tool is a jointing planer with nickel plated blade holder.3 dual sharpened spare blades in shaft.Dimension – 9 x 2.3 x 1 in.Item Weight – 0.5 lbs.

$54.81

Electric Welding


Electric Welding

Text extracted from opening pages of book: ELECTRIC WELDING ELECTRIC WELDING BY ETHAN VIALL EDITOR AMERICAN MACHINIST Member American Society of Mechanical Engineers, Society of Automotive Engineers, American Institute of Electrical Engineers, Franklin Institute, American Welding Society. Author of Manufacture of Artillery Ammunition, United States Artillery Ammunition, United States Rifles and Machine Guns, Broaches and Broaching, Gas-Torch and Thermit Welding. FIRST EDITION THIRD IMPRESSION McGRAW-HILL BOOK COMPANY, INC. NEW YORK: 370 SEVENTH AVENUE LONDON: 6 & 8 BOUVERIE ST., E. C. 4 1921 COPYRIGHT, 1921, BY THE McGRAW-HILL BOOK COMPANY, INC. PRINTED IN THE UNITED STATES OF AMERICA PREFACE Few fields afford a greater opportunity for study to the mechanic, the student, or the engineer, than that of electric welding. Arc welding, with its practical, every-day, shop appli cations for repair and manufacture, is in some respects crowding closely into the field in which the gas-torch has seemed supreme. With the development of mechanical devices for the control of the arc, the range of application to production work has greatly increased. Resistance welding presents in its various branches some of the most interesting scientific and mechanical problems to be found anywhere. Spot-welding butt-welding line-welding all occupy a particular place in our manufacturing plants today, and new uses are being constantly found. In the gathering and arranging of the material used in this book, particular care has been taken to classify and place various subjects together as far as possible. This is not only convenient for reference purposes, but enables the reader to easily compare different makes and types of apparatus. In most cases, the name of the maker of each piece of apparatus is mentioned in the description in order to save the time of those seeking information. No time or pains have been spared in the endeavor to make this the most comprehensive book on electric welding equipment and practice, ever published. Every possible source of informa tion known to the long-experienced editor has been drawn upon and properly credited. It is hoped that this book will prove a permanent record of electric welding as it is today, and also be an inspiration and source of information for those engaged in practice, research or development. ETHAN VIALL. New York City, November, 1920. 3 CM 5 v o CONTENTS PAGE PREFACE v CHAPTER I ELECTRIC WELDING HISTORICAL 1-8 The Two Classes of Electric Welding The Zerner, the Ber nardos, the Slavianoff, the Strohmenger-Slaughter and the LaGrange-Hoho Processes Early Methods of Connecting for Arc Welding Early Resistance Welding Apparatus First Practical Butt-Welding Device DeBcnardo Spot-Welds The Kleinschmidt Apparatus Bouchayer''s Machine Principle of the Harmatta Patent The Taylor Cross-Current Spot-Welding Method. CHAPTER II ARC WELDING EQUIPMENT 9-27 What Electric Arc-Welding Is^ Uses of B. C. and A. C. Schematic Layout for an Arc-Welding Outfit Carbon Electrode Process Metallic Electrode Process Selection of Electrodes Relation of Approximate Arc Currents and Electrode Diam eters Approximate Current Values for Plates of Different Thickness Illustrations of the Difference Between the Carbon and the Metallic Arc Methods Electrode Holders Sizes of Cable for Current Face Masks Selecting a Welding Outfit Eye Protection in Iron Welding Operations The Dangerous Rays Properties of Various Kinds of Glass. CHAPTER III DIFFERENT MAKES OF ARC WELDING SETS 28-46 General Electric Compound-Wound Balancer-Type Arc Weld ing Set The Welding Control Panel Connections for G. E. Welding Set Data for Metallic-Electrode Arc Butt-and Lap-Welds Carbon-Electrode Cutting Speeds The Wilson Plastic-Arc Set Panel for Wilson Welding and Cutting Set Wilson-Portable Outfit The Lincoln Outfit Westinghouse Single viii CONTENTS PAGE Operator Outfit The U. S. Outfit The Zeus Outfit The Arcwell Outfit Alternating-Current

$41.95

TEKTON 3850 9 Welding Clamp


TEKTON 3850 9 Welding Clamp

TEKTON 3850 9″ Welding Clamp Type: Clamps

$16.74

Welding Licensing Exam


Welding Licensing Exam

Get Everything You Need to Help You Pass the Certified Welding Exams on the First Try The "Welding Licensing Exam Study Guide" contains everything needed to pass the Welding Code Book and Fundamentals exams with flying colors. This career-building resource includes calculations and troubleshooting tips that equip you with the skills, knowledge, and confidence required to ace these certification tests. "The Welding Licensing Exam Study Guide" features: Over 850 exam-style multiple choice and true/false questions & answers Numerous welding calculations and troubleshooting tips More than 200 detailed drawings and illustrations In-depth coverage of welding tools and their use The latest welding safety procedures Guidance on studying welding methods SI and English units for all problems and equations Improve Your Grasp of Every Welding Exam Topic – Welding and Cutting Processes: Oxyacetylene Welding and Cutting – Shielded Metal Arc Welding – Flux Cored Arc Welding – Gas Metal Arc Welding – Gas Tungsten Arc Welding – Plasma Arc Welding and Cutting – Braze Welding – Brazing – Soldering – Metals and Metal Alloys: Cast Iron – Wrought Iron – Carbon Steels – Low and High Alloy Steels – Refractory and Reactive Metals – Galvanized Metals – Aluminum – Copper – Nickel – Magnesium – Lead, Tin, and Zinc – Tool and Die Steels – Hardfacing – Joints and Welds: Types of Joints – Welding Positions – Types of Welds – Weld Terminology – Welding Symbols – Common Welding Problems – Tips for Producing Good Welds – And Much More

$38.66

Welding


Welding

No Synopsis Available

$11.64

9% nickel welding

Auto parts industry has had problems

The new energy vehicles roaring not far from our imagination market held face the embarrassment of culture. The underlying reason is not formed before industrialization resulting high prices. Therefore, these high prices is how exactly did this happen?

The Shanghai International Auto Show this year compared to 2008 International Auto Show in Beijing was not new cars are more energy on the screen. Thus, as trade with China, the giant utility vehicles, the screen shows Third Generation Europe Fukuda V technology of fuel cells, low-floor buses the city became the star of the opening day of the commercial vehicle market. Despite the symbolic importance of these buses have zero emissions, including a number of technical indicators are also at international level, which led, but the cost of this bus cycle rates also reached a record five million yuan.

In fact, the incredibly high prices for new energy vehicles in China is not a unique phenomenon in the field. Coincidentally, Suzhou Jinlong Fukuda before generating fuel cell buses thirds also been shown in public for Haig a bus of new energy. Despite high prices are not Fukuda, but the bike is also the cost of more than 3.5 billion yuan.

The high cost mainly due to two reasons. Tong passenger car market, according to the person in charge of the Department, as the bus of the new energy that beginning, the manufacturers have paid particular attention to the power bus to build their new own brand, luxury decor, which is causing a major cause of high prices. "More importantly, the pure electric car is the State 863 research projects are currently still in R & D, however, no real industrial chain. The high price is inevitable. "

the passenger car market professionals ministry Tong said. In fact, not brought before industrialization, leading high cost of cars that many factors. For example, A pure battery electric bus system and electric control of the high cost of energy aimed directly at the new prices of passenger cars. Are they still in the development of the state of components and systems, in small quantities to promote the process is difficult to reduce costs. For example, the fuel cell buses still in power around the current price of 100 million yuan.

In January 2009, buses in Shanghai Ruihua Group Ankai delivered 10 electric buses. It should be noted that sales of cars Ankai pure electric drive 10 passengers only provides hundreds of millions of yuan. Although prices remain high, but with other bus yuan easily Sanwubaiwan Electric the price, that price is, basically, can be customer acceptance.

"The price drop is due mainly to two areas: first, We have a small-scale production. On the other hand, as a buyer, Shanghai Ruihua group is joint research with technical difficulties meet our power systems business. They will use a bus eight years after the voluntary withdrawal of pure electric car battery. "Head Ankai marketing, said Xu Yingchun well, while the Ruihua Ankai and approach new sources of energy for our country in reducing the cost buses to provide a reference.

And pure electric bus is similar Department also includes hybrids relatively mature.

"While the global scale, the hybrid can be considered the domain of energy vehicles now relatively new technology mature, but has been basically achieved commercial. But because of their need to provide two sets of internal combustion engine and power systems power, and the phenomenon must be the highest price. "Experts cars Energy, New Energy Automotive Engineering of Tongji University, said member Zechang market point of view the most common mixture moderate system electric, nickel-hydrogen need to provide a maximum power of 12 kW to 20 kW for voltage to 144 volts to 300 volts wide, which will probably increase the cost of the battery more. "In addition to these core technologies, the car must also control unit systems, instrumentation, as the supplement. Add to this prototype hybrid model of the quality itself is good, the prices of hybrid cars, of course, much greater the prototype cars. "

"The new energy vehicles, while the benefits of environmental savings energy, but not necessarily on the market will be welcomed by consumers. "Automotive Research Institute of Tsinghua University, Professor Chen Quanshi that, although the country has been promoting energy saving environmental protection, energy vehicles new, but the actual fee car users will not pay the bill. "They may be more concerned about the costs of cars and real incomes, saving energy and protecting the environment resulting social benefits is not significant. Currently, the price of hybrid buses are usually hundreds of thousands of hundreds of million yuan, with the same model more expensive than cars ordinary many economies in fuel consumption by reducing the use of cost seems to be difficult to compensate the higher costs cars. "

"National 863 Program has increased the price of hybrid buses can not exceed 30% of ordinary diesel cars, the rate of fuel higher than passenger cars with diesel engines normal 30%. The fact that the situation is reversed, the rate of hybrid buses is low power not only well below that goal, their prices are much higher than ordinary diesel buses by 30%. Although some products bus field testing to achieve the above savings, but in actual operating conditions is difficult. "Chen said that the whole world.

It is said that Beijing Public Transport runs a "model", which means more hybrid buses is an electronic system used by national companies. However, there are several sources of energy that car prices well below the national needs of the range of prices and standards. "It is for this reason, the current control system China's hybrid bus is more expensive to use more imported products. Also caused the domestic price of hybrid buses high. "The official said Beijing Bus.

Obviously, cost of passenger cars continued high energy is their lack of access to a wide range on the market to promote question. While on the other hand, sales of small areas, which it is difficult for companies to really realize the industrialization, so that vehicles new energy, a vicious circle, directly hindered the healthy development of energy vehicles. "If we break the vicious circle of today only the government can come to resolve. "

This shows that the new energy vehicles in China for research institutes life "Ichii" to reach its own technology, large-scale development is clearly a priority. New materials, new devices components and research and development, and constantly strive to reduce manufacturing costs, but also on the market for new energy vehicles necessary step leading to a threshold, otherwise, new energy vehicles will pay a high price for the afflicted.

In addition to their own higher costs, there is a phenomenon.
Compared with the Overseas markets in the passenger area of the domestic price of vehicles new energy to be much more percentage points higher. For example, listed in the 2009 Honda Civic Hybrid car is priced at 269,800 yuan, while that the U.S. market, the new version of 2006 Civic (Forum Gallery) hybrids are priced at just 179.2 thousand yuan. The price difference between markets nationals and foreigners is obvious.

In this sense, industry experts, analysts estimate that, on the surface, our country and abroad in the field of new energy vehicles in the same starting line, but this is not the case. And abroad is relatively mature compared with the vehicle of the new energy market is still in its infancy at home. "At the moment, the world's leading companies Auto sales are essentially hybrids will focus on Europe and the United States market pay more attention to Europe and the market share of U.S. sales and profits, while the Chinese market, as Japanese car companies Honda and are more likely play card''concept''with To take the initiative in forming the consumer market for the brand in China. As the relative Sales and marketing in a secondary position, the high price is inevitable. "

8-inch Self Adjusting Wire Stripper-Wire and Cable Crimping ,Stripping Cutting Pliers with Free Magnetic Head Screwdriver set


8-inch Self Adjusting Wire Stripper-Wire and Cable Crimping ,Stripping Cutting Pliers with Free Magnetic Head Screwdriver set

Horsey Tools (HT) – Supplying quality tools for your requirements! With a firm commitment to provide the best value and to maintain the highest standards of workmanship and customer care, HT is trusted name in the industry! We buy direct from the same factories who supply the expensive brands and pass the savings on to you so buy our quality product with Confidence!! Wire Stripping Made Easier…

$21.99

PowerSmart 14.4V 2000mAh Ni-Cd 48-11-1000, 48-11-1014, 48-11-1024 Drill Battery for Milwaukee PAS 14.4 Power Plus, PCG 14.4, PES 14.4 T, PIW 14.4 HEX, PIW 14.4 SD, PJX 14.4 Power Plus, PLD 14.4 X Power Tools


PowerSmart 14.4V 2000mAh Ni-Cd 48-11-1000, 48-11-1014, 48-11-1024 Drill Battery for Milwaukee PAS 14.4 Power Plus, PCG 14.4, PES 14.4 T, PIW 14.4 HEX, PIW 14.4 SD, PJX 14.4 Power Plus, PLD 14.4 X Power Tools

This replacement battery is also compatible with the following models:

0511-21, 0512-21, 0512-25,
0513-21, 0513-20, 0514-20,
0514-24, 0514-52, 0516-20,
0516-22, 0516-52, 0612-20,
0612-22, 0612-26, 0613-20,
0613-24, 0614-20, 0614-24,
0615-24, 0616-20, 0616-24,
0617-24, 49-24-0150, 6562-21,
6562-23, 6562-24, 9081-20,
9081-22, 9082-20, 9082-22,
9083-20, …

$35.14


Wall Lights Wall Sconce Vintage Industrial Resin Iron Wall Lamp Bedroom Bedside Hallway Bar Cafe Restaurant Staircase Lighting Decorations


Wall Lights Wall Sconce Vintage Industrial Resin Iron Wall Lamp Bedroom Bedside Hallway Bar Cafe Restaurant Staircase Lighting Decorations

Type of light source incandescent220 voltage (v)Lampshade materials glassLamp specification E27Dimensions 160*280*540 (mm)Chinese style vintage antiqueThe main scope of tea aisle bars cafesSwitch-type buttonsAverage service life 50000 (h)…

$480.00

Wall Lights Wall Sconce Vintage Industrial Stained Glass Iron Wall Lamp Bedroom Bedside Hallway Bar Cafe Restaurant Staircase Lighting Decorations


Wall Lights Wall Sconce Vintage Industrial Stained Glass Iron Wall Lamp Bedroom Bedside Hallway Bar Cafe Restaurant Staircase Lighting Decorations

Type of light source incandescent220 voltage (v)Lampshade materials of ironLamp specification E27Dimensions 250*130*410 (mm)The main scope of Inn and cafe bar restaurant hallSwitch-type cableAverage service life 50000 (h)…

$131.00

Wall Lights Wall Sconce American-Style Country Bamboo Wall Lamp Bedroom Bedside Hallway Bar Cafe Restaurant Staircase Lighting Decorations


Wall Lights Wall Sconce American-Style Country Bamboo Wall Lamp Bedroom Bedside Hallway Bar Cafe Restaurant Staircase Lighting Decorations

Type of light source incandescent220 voltage (v)Lampshade materials glassLamp specification E27Dimensions 240*330 (mm)Style of American rural Eastern Mediterranean new ChineseSwitch-type buttonsAverage service life 50000 (h) …

$185.00

10PK TIG 2% Thoriated Tungsten Electrode Rod WT20 1.6mm 1/16x7 175mm Stainess Steel Welding Red Tip


10PK TIG 2% Thoriated Tungsten Electrode Rod WT20 1.6mm 1/16×7 175mm Stainess Steel Welding Red Tip

Details: 1. WT20 2% Thoriated Tungsten Electrodes For TIG Welding. 2. Ground Finish. 3. Red tips. 4. Dioxide:ThO2/ Dioxide in:1.70-2.20% / Impurities:≤ 0.20% Advantage: 1. Most common used./ Lower Electronic Function./ Higher Crystallization temperatures./ Better conductivity/ Better Mechanical Cutting Performance. 2. Low melting rate/ Longevity usage/ Good performance for DC 3. Easier arc s…

$12.59

Nickel Welding Rod Tig

TIG Welding Rod, ER80S, 1/16,1 lb


TIG Welding Rod, ER80S, 1/16,1 lb

TIG Welding Rod, ER80S, 1/16,1 lb Type: ER80S-D2 Material: Mild Steel

$14.7

23XM54 TIG Welding Rod, Carbon Steel, R-60, 3/32


23XM54 TIG Welding Rod, Carbon Steel, R-60, 3/32

23XM54 TIG Welding Rod, Carbon Steel, R-60, 3/32 Type: Welding Supplies

$67.59

GENERIC ER308LSI-063-01T Tig Welding Rod, 0.062, ER308LSI


GENERIC ER308LSI-063-01T Tig Welding Rod, 0.062, ER308LSI

GENERIC ER308LSI-063-01T Tig Welding Rod, 0.062, ER308LSI Type: Welding Supplies

$15.71

23XM60 TIG Welding Rod, ER309L, 5/32, 10 lb.


23XM60 TIG Welding Rod, ER309L, 5/32, 10 lb.

23XM60 TIG Welding Rod, ER309L, 5/32, 10 lb. Type: Welding Supplies

$212.42

23XM69 TIG Welding Rod, ER430, 1/16, 10 lb.


23XM69 TIG Welding Rod, ER430, 1/16, 10 lb.

23XM69 TIG Welding Rod, ER430, 1/16, 10 lb. Type: Welding Supplies

$110.3

23XM72 TIG Welding Rod, ER430, 5/32, 10 lb.


23XM72 TIG Welding Rod, ER430, 5/32, 10 lb.

23XM72 TIG Welding Rod, ER430, 5/32, 10 lb. Type: Welding Supplies

$97.97

23XM45 TIG Welding Rod, Carbon Steel, ER70S-2


23XM45 TIG Welding Rod, Carbon Steel, ER70S-2

23XM45 TIG Welding Rod, Carbon Steel, ER70S-2 Type: Welding Supplies

$62.39

GENERIC ER309L-094-01T Tig Welding Rod,0.093,ER309L G9723917


GENERIC ER309L-094-01T Tig Welding Rod,0.093,ER309L G9723917

GENERIC ER309L-094-01T Tig Welding Rod,0.093,ER309L G9723917 Type: Welding Supplies

$18.8

23XM56 TIG Welding Rod, Carbon Steel, R-60, 5/32


23XM56 TIG Welding Rod, Carbon Steel, R-60, 5/32

23XM56 TIG Welding Rod, Carbon Steel, R-60, 5/32 Type: Welding Supplies

$64.45

nickel welding rod tig
Deloro Stellite Corporate Video



WeldingCity 1-lb Cast Iron Repair Stick Electrode 1/8x14 Rod Nickel55 Ni55 ENiFe-C1


WeldingCity 1-lb Cast Iron Repair Stick Electrode 1/8×14 Rod Nickel55 Ni55 ENiFe-C1

Core wire: ~55% Nickel plus ~45% Iron (Nickel55), 1/8″ (3.2mm) diameter, 14″(350mm) length…

$14.95

Blue Demon ERNI99 X 1/16 X 36 X 1# Tube nickel 99 cast iron TIG welding rod


Blue Demon ERNI99 X 1/16 X 36 X 1# Tube nickel 99 cast iron TIG welding rod

Erica (Nickel Alloy (99) is used for TIG and MIG welding of cast iron. This wire is extensively used to repair gray iron castings….

$65.74

Blue Demon ERNI55 X 3/32 X 36 X 1# Tube nickel 55 cast iron TIG welding rod


Blue Demon ERNI55 X 3/32 X 36 X 1# Tube nickel 55 cast iron TIG welding rod

Ni55FC-G is a composite metal cored wire for repair and joining of cast iron metals. The deposit, which is approximately 53% iron and 45% nickel, provides an excellent match for the coefficient of expansion exhibited by cast irons….

$50.02

B.W.P Red Tungsten Electrodes Ground Finish Assorted TIG Welding Rod WT20 2% Thoriated 1.6mm 2.4mm x 175mm (1/16 3/327 )


B.W.P Red Tungsten Electrodes Ground Finish Assorted TIG Welding Rod WT20 2% Thoriated 1.6mm 2.4mm x 175mm (1/16 3/327 )

Details: 1. WT20 2% Thoriated Tungsten Electrodes For TIG Welding. 2. Ground Finish. 3. Red tips. 4. Dioxide:ThO2/ Dioxide in:1.70-2.20% / Impurities:≤ 0.20% Advantage: 1. Most common used./ Lower Electronic Function./ Higher Crystallization temperatures./ Better conductivity/ Better Mechanical Cutting Performance. 2. Low melting rate/ Longevity usage/ Good performance for DC 3. Easier arc s…

$14.78

ERNI55 X 1/16in X 36in X 1 lb Tube nickel 55 cast iron TIG welding rod (24 Lbs)


ERNI55 X 1/16in X 36in X 1 lb Tube nickel 55 cast iron TIG welding rod (24 Lbs)