Stainless Steel Welding Temperature

Blue Demon  E308L-16 X 3/32 X 14 X 5# Plastic Stainless Steel Arc Welding Electrode


Blue Demon E308L-16 X 3/32 X 14 X 5# Plastic Stainless Steel Arc Welding Electrode

E308/308L-16 is an extra low carbon electrode for welding 304L, 321 and 347 stainless steels. The controlled ferrite in the weld deposits gives excellent notch toughness at cryogenic temperatures….

$29.85

Blue Demon  ER308L X .045 X 36 X 1# Tube stainless steel TIG welding rod


Blue Demon ER308L X .045 X 36 X 1# Tube stainless steel TIG welding rod

ER308/308L is used for welding types 304, 304L, 308 and 308L stainless steels. It is very similar to type 308 but has a carbon content held to a max of .03%….

$15.53


Hobart H522506-R19 0.030-Inch 2-Pound ER308L Stainless Steel Welding Wire


Hobart H522506-R19 0.030-Inch 2-Pound ER308L Stainless Steel Welding Wire

These Hobart Mig Wire Rolls Have The Smooth And Clean Surfaces Required For Efficient Wire Feed. Wire Produces Minimal Splatter And Is Easy To Clean Up….

$28.81

Blue Demon  ER316L X 1/16 X 36 X 1# Tube stainless steel TIG welding rod


Blue Demon ER316L X 1/16 X 36 X 1# Tube stainless steel TIG welding rod

ER316/316L is used for welding types 316 and 316L stainless steels. It has a maximum carbon content of .03% to reduce the possibility of formation of carbide precipitation….

$14.85

Blue Demon  ER308L X 1/16 X 36 X 1# Tube stainless steel TIG welding rod


Blue Demon ER308L X 1/16 X 36 X 1# Tube stainless steel TIG welding rod

ER308/308L is used for welding types 304, 304L, 308 and 308L stainless steels. It is very similar to type 308 but has a carbon content held to a max of .03%….

$9.99




Sonya Shabu Shabu Hot Pot Electric Mongolian Hot Pot W/DIVIDER


Sonya Shabu Shabu Hot Pot Electric Mongolian Hot Pot W/DIVIDER

Specification: Model: SYHS-30 Voltage: 120V/60Hz Power: 1500W Material: Stainless Steel Capacity: 5.0 L Temperature Control Setting: 4 Diameter: 30 cm Updated on Feb 2017: The leakage issue mentioned in the reviews has raised the serious attention by the manufacturer side.The new replenishment has been improved with the high quality control. Every piece has been inspected by the manufacturer befo…

$69.99

Stainless Steel Welding Temperature

Stainless Steel Welding Temperature

Stainless Steel & High Temp Alloy Shearing Weld Coupons @ AAA Metals Co., Inc


What is the effective process/procedure to weld Mild Steel and 304 Stainless Steel material? Oper. Temp 700 C.

Question asked is for an aplication of a cookin PAN Fabricated out of 304 Stainless Steel sheet 2 to 3 mm thick sheet material. To improve Thermal conduction it is desired to weld the bottom of the cooking PAN with 10 to 12 mm thick Mild Steel plate material. Operating Temperature may be in the region of 700 to 800 Degree Centigrade as the bottom of PAN is directly heated with gas fired burners. Please give valuable input for this application. THANKS.

Why would you do this since you can buy stainless steel clad plate in various thicknesses right from the mill, and all you have to do is form it.

The stainless steel is clad directly to the steel plate by a heat and pressure rolling process.

We built a lot of chemical equipment using stainless steel clad plate, such as tanks, mixing vats, pressure vessels, etc,

Leave a Reply