Mig Welding Argon Gas Bottles

Argon CO2 Mig Tig Flowmeter Regulator Welding Regulator Gauge Gas Welder


Argon CO2 Mig Tig Flowmeter Regulator Welding Regulator Gauge Gas Welder

Argon CO2 Mig Tig Flowmeter Regulator Welding Regulator Gauge Gas Welder

$25.98

Reduced Pressure Argon Gas Flow-meter Decrement Gauge Regulator Kgiam


Reduced Pressure Argon Gas Flow-meter Decrement Gauge Regulator Kgiam

Fits virtually all gas bottles. Calibrated for Argon gases.Impact Resistant Polycarbonate Flowmeter.Easy to read gauge shows both PSI and MPa tank pressure.Metal Inlet Filter protects gauge.Safety Pressure Relief Valve.Pre-Calibrated Adjustable Inlet Pressure and Flow to 25 LPM.A must have for both MIG and TIG welding.

$80.99

US Forge 00678 MIG Welding Wire 0.030, Aluminum


US Forge 00678 MIG Welding Wire 0.030, Aluminum

Requires 100% Argon shielding gas. High magnesium content to help increase weld strength and decrease crack sensitivity. For general aluminum welding app

$10.86

42303 Flux Core Mig Welding Wire 0.035, Mild Steel


42303 Flux Core Mig Welding Wire 0.035, Mild Steel

Best suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge m

$61.99

Argon CO2 Mig Tig Flow meter Regulator Welding Weld


Argon CO2 Mig Tig Flow meter Regulator Welding Weld

Argon CO2 Mig Tig Flow meter Regulator Welding Weld Features: Flowmete which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed -Brass Body -Preset : 30 P.S.I. -Flowmeter Range 10-60 SCFH -inlet connection:CGA580 -connection: female UNF9/16 with 1/4″ barbed fitting -The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube

$27.99

Mig Welding Guide


Mig Welding Guide

MIG (metal inert gas) welding, also known as gas metal arc welding (GMAW), is a key joining technology in manufacturing. MIG welding guide provides a comprehensive, practical and accessible guide to this widely used process. Part one discusses the range of technologies used in MIG welding, including power sources, shielding gases and consumables. Fluxed cored arc welding, pulsed MIG welding and MIG brazing are also explored. Part two reviews quality and safety issues such as improving productivity in MIG/MAG welding, assessing weld quality, health and safety, and methods for reducing costs. The final part of the book takes a practical look at the applications of MIG welding, with chapters dedicated to the welding of steel and aluminium, the use of robotics in MIG welding, and the application of MIG welding in the automotive industry. MIG welding guide is essential reading for welding and production engineers, designers and all those involved in manufacturing. Provides extensive coverage on gas metal arc welding, a key process in industrial manufacturing User friendly in its language and layout Looks at the practical applications of MIG welding

$265

Mig Welder Gas Regulator


Mig Welder Gas Regulator

Dual gauge Co2, Argon regulator for Eastwood Mig135 (12011)and Mig175(12012).

$49.99

Hobart 500495 Handler 125 MIG 115-Volt Welding Package


Hobart 500495 Handler 125 MIG 115-Volt Welding Package

The Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using 030-.035 in 0.8-0.9 mm flux cored wire. MIG-Ready means This welder is equipped with a built-in gas valve, and with the addition of a regulator, you’re ready to MIG weld with 023-.030 in 0.6-0.8 mm solid wire. Use C-25 gas 75 argon/25 CO2 on 24 gauge – 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 ga. stainless steel. Duty Cycle 20 @ 90A, Dimensions L x W x H in 10 x 12 x 17, Cart No, Clamp Cable Length ft 8, Wire Feed Speed Control Infinite, Shielding Gas Required For MIG Welding, Weld Thickness in 18 ga.-3/16 in steel, Welding Wire Diameter in 0.023-0.035, Amps 125, Volts 115, Weldable Metals Steel, stainless steel, Power Cord ft 6, Regulator and Gas Hose not included, Mig Ready Gas solenoid valve pre-installed. Welds 24 ga. up to 3/16 in steel with flux cored wire Proven built-in wire feeder with quick-release drive roll tension lever Built-in contactor eases use and is an excellent safety feature which makes wire electrically ‘cold’ when not welding 4 output voltage settings with wire feed speed tracking to provide quick and easy adjustment for different materials and thicknesses Dual groove drive rolls make it easy to switch between 023/.025 in 0.6mm and 0.030 – 0.035 in 0.6 – 0.9 mm wire Self-resetting thermal overload and motor protection Stock Numbers #500495 115 VAC, 60 Hz Rated Output at 20 Duty Cycle 85 Amp at 17.5V DC 60 Amp at 20V DC CSA Rating Current range 30 – 125 Amps Max. open-circuit voltage 26V Wire feed speed range 0 – 415 IPM 0 – 500 IPM at no load Amps Input at rated load, 60 Hz 115V 20 15 CSA rating kVA 2.9 2.2 CSA Rating kW 2.5 1.77 CSA rating Dimensions 16 7/8 in H 429 mm x 9 7/8 in W 251 mm x 12 1/8 in D 308 mm Net weight 50 lb 22.7 kg

$739.98

NEW MIG Welder 110VAC 135 amp Output Welding


NEW MIG Welder 110VAC 135 amp Output Welding

Eastwoods 135amp max power Mig welder with 20% duty cycle at 90 amp. Operates on standard 110VAC 20 amp circuits. Unit includes 0.023″ solid mig wire, gas regulator and instruction book, the only thing you will need is to rent a bottle of 25% CO2/75% Argon. These units have been tested against the leading U.S. brands and are of comparable quality in both weld penetration and wire feed motor functionality. Don’t be fooled by the low cost- these units have individual and infinite adjustment for voltage and wire speed. 3 year manufacturer warranty, backed by Eastwood’s no hassle return policy. Includes: Eastwood Mig 135 Welder 0.023″ steel mig wire Gas regulator Instructions These units are assembled, tested and conform to CE, TUV, and ETL specifications, for U.S. and European sales. Drive motor and rectifier construction offer surpassed weld quality and ease of use. Infinitely adjustable heat (amperage) and wire speed settings tailor the machine to suit your material and welding style Handles industrial standard 4″ or 6″ wire spools and incorporate resettable overload protection to assure long life Internal fan directs air accross the rectifier heat sinks, cooling the semiconductors and ultimately producing a more controlled welding output Packaged complete with regulator, wire, tips, nozzle, and instructions “Quick Set” Weld chart eliminates guess work by simply selecting the material thickness and setting the controls accordingly Tweco style gun utilize industry standard replacement parts

$389.99

mig welding argon gas bottles

argon welding gas for a mig welder?



we have a bottle of argon for the mig welder but its 15 years old,does it go bad over time?

Nope you are good to go. Argon is not flammable it just promotes
the welding process. Try a test weld first.

Leave a Reply