Gage Block

Shars Tool 81 Piece Steel Precision Gage Block Set with Nist Traceable Certificate: .1001 to .1009, .101 to .149, .05 to .95,1;2


Shars Tool 81 Piece Steel Precision Gage Block Set with Nist Traceable Certificate: .1001 to .1009, .101 to .149, .05 to .95,1;2

Surface hardened to 64 HRC; Meets or exceeds Federal GGG-G-15C; Included NIST traceable certificate; Grade ECONOMY ; Higher degree of accuracy when used at temperature of 68°F (20°C); Individual serial numbers on each block, regardless of grade; A complete certificate of calibration traceable to the N.I.S.T. showing the deviation of each block; All sets are supplied in deluxe fitted wood case; A…

$87.95

Fowler 53-672-081 Steel Shop-Blox Rectangular Economy Gage Block Set, 81 Piece


Fowler 53-672-081 Steel Shop-Blox Rectangular Economy Gage Block Set, 81 Piece

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27″ and is accurate to + or – 0.00006″. Resolution is 0.00001″ and the measuring depth is 3.15″. The gauge has constant spring pressure for repeatability and Bower’s FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form er…

$163.95

iGaging Micrometer Calibration Set Gage Block + Optical N.I.S.T. (NIST) Traceble Certified AS0


iGaging Micrometer Calibration Set Gage Block + Optical N.I.S.T. (NIST) Traceble Certified AS0

11 pc Micrometer Calibration Set Gage Block + Optical N.I.S.T. (NIST) Traceble Certified AS0Each set comes with a certificate of calibration traceable to NIST and each gage block is etched with a unique serial number. The certificate was issued by the factory at the time of manufacture. Features:Super High Tolerance Garde AS-0 (AS0) 9 pc rectangular blocks and 2 optical flatsContains one block of …

$184.95

HHIP 2-1/2 INCH SINE BAR (3402-1203)


HHIP 2-1/2 INCH SINE BAR (3402-1203)

2-1/2″ Sine Bar | For angles set up by using Sine Bar with 1-2-3 Blocks or Gage Block. | Parallelism: 0.0004″. | Working face accuracy 0.00003″/ per inch. | Rolls center distance accuracy 0.0002″. | Flange on the end for the resting of workpiece….

$38.77


Don't Block Gate Sign


Don’t Block Gate Sign

This “don’t block gate” sign is screen printed on .06 gage polystyrene. It is 12.75″ x 11.5″….

$12.95

Grundens GSTB Unisex Eat Fish Wear Gage Salmon Logo T-Shirt


Grundens GSTB Unisex Eat Fish Wear Gage Salmon Logo T-Shirt

It is no secret that we at Grundéns love fishermen. The Eat Salmon logo was developed to remind those who see it that we should all Eat Salmon and appreciate all those who make that simple joy possible….

$29.99



81 pc Steel Gage Block Set .000005 Space Block Harden Gauges Gauge Block Grade B


81 pc Steel Gage Block Set .000005 Space Block Harden Gauges Gauge Block Grade B

9 Blocks — .1001″ thru .1009″ step of .0001″***49 Blocks — .101″ thru .149″ step of .001″***.19 Blocks — .050″ thru .950″ step of .050″***4 Blocks — 1.000 thru 4.000 step of 1.000″.*** The interior separator is made out of plastic, therefore it will guarantee the gage blocks won’t get wet or rusty….

$109.98

Gage Block

Gage Block

how to use gage blocks for inspection?

I am assuming, the gage blocks you are referring to,are for production inspection.These are commonly referred to as” go and no-go” gages.The “go”side of gage would meet manf. specs. and would fit.The “no-go”side of gage would purposely be made ” out of tolerance” and would not fit the part.

Mahr Federal Gage Block Comparator

http://www.youtube.com/v/aK3a3NIsYgc&hl=en&fs=1

Leave a Reply