Flux Core Mig Welding Body Panels

Flux Core Mig Welding Body Panels

RADNOR RAD64007001 MIG Welding Gun,Flux Core,350A,15 ft.


RADNOR RAD64007001 MIG Welding Gun,Flux Core,350A,15 ft.

RADNOR RAD64007001 MIG Welding Gun,Flux Core,350A,15 ft.

$388.73

MIG-100 GAS-LESS FLUX CORE WIRE WELDER WELDING MACHINE


MIG-100 GAS-LESS FLUX CORE WIRE WELDER WELDING MACHINE

MIG-100 GAS-LESS FLUX CORE WIRE WELDER WELDING MACHINE – Voltage: 115 V / 60 Hz Single Phase Welding Current: 63 – 68 AMP (MIN) 79 – 90 AMP (MAX) Duty Cycle: 15% at 90 AMP 35% at 60 AMP Max open voltage: 33V Wire Capacity: 0.030″ or 0.035″ Variable Feed Speed Control COOLING FANS Torch With Full On / Off Safety Control Automatic Thermal Safety Protection Enter your model number above to make sure this fits. Welding Current:63 – 68 AMP (MIN) 79 – 90 AMP (MAX) Duty Cycle:15% at 90 AMP 35% at 60 AMP. kI

$363.34

RADNOR RAD64007000 MIG Welding Gun,Flux Core,350A,10 ft.


RADNOR RAD64007000 MIG Welding Gun,Flux Core,350A,10 ft.

RADNOR RAD64007000 MIG Welding Gun,Flux Core,350A,10 ft.

$343.87

23106 .030-Inch MIG Welding Flux Core Wire -10#


23106 .030-Inch MIG Welding Flux Core Wire -10#

Hot Max 23106 .030-Inch MIG Welding Flux Core Wire -10# – MIG Welding Flux Core Wire (E71T-GS) alloy is a high strength flux core wire which produces a deep penetrating weld without shielding gas. Excellent in windy conditions. Tensile Strength: 80000 PSI. Shielding Gas: None Required but 75-Percent CO2/25-Percent Argon (C-25) will reduce spatter. Machine Polarity: DCEN Straight Polarity (MIG DC -). Enter your model number above to make sure this fits. High strength flux core wire which produces a deep penetrating weld without shielding gas Excellent in windy conditions Tensile Strength: 80000 PSI Shielding Gas: None Required but 75-Percent CO2/25-Percent Argon (C-25) will reduce spatter. oE

$183.42

23107 .035-Inch MIG Welding Flux Core Wire - 10#


23107 .035-Inch MIG Welding Flux Core Wire – 10#

Hot Max 23107 .035-Inch MIG Welding Flux Core Wire – 10# – MIG Welding Flux Core Wire (E71T-GS) alloy is a high strength flux core wire which produces a deep penetrating weld without shielding gas. Excellent in windy conditions. Tensile Strength: 80000 PSI. Shielding Gas: None Required but 75-Percent CO2/25-Percent Argon (C-25) will reduce spatter. Machine Polarity: DCEN Straight Polarity (MIG DC -). Enter your model number above to make sure this fits. High strength flux core wire which produces a deep penetrating weld without shielding gas Excellent in windy conditions Tensile Strength: 80000 PSI Shielding Gas: None Required but 75-Percent CO2/25-Percent Argon (C-25) will reduce spatter. kN

$139.15

My Harbor Freight Welder Easy Mig 100 demo/Review (flux core) and test welds

Flux Core Mig Welding Body Panels

Leave a Reply