Cast Steel Welding Electrode

General Purpose Welding Electrode


General Purpose Welding Electrode

Packaged in convenient 1 lb (pound), 5 lb, 10, and 50 lb bulk packages. Superior in weldability to standard production grade rods. AWS (American Welding Society) classification numbers are indicated on each package (see below). E-6011: Premium mild steel electrode, fast freeze, deep penetrating for general-purpose uses. Welding through medium amounts of paint, rust, and dirt. E-6013: A low penetrating electrode; all position low amps. Sheet metal-general all-purpose. E-7014: Light to medium penetration. Smooth, fine-rippled bead appearance. All-purpose electrode. Heavy sheet metal. E-7018: Premium low-hydrogen electrode with x-ray quality, dense deposits. Low splatter and amps, flat bead. No. 40101: Length: 14”, Model Compatibility: E-6013, Diameter: 1/16”, Weight: 1/2 lb, Package Type: Box No. 40102: Length: 14”, Model Compatibility: E-6013, Diameter: 1/16”, Weight: 1 lb, Package Type: Box No. 30301: Length: 14”, Model Compatibility: E-6013, Diameter: 3/32”, Weight: 1 lb, Package Type: Box No. 30305: Length: 14”, Model Compatibility: E-6013, Diameter: 3/32”, Weight: 5 lb, Package Type: Box No. 30401: Length: 14”, Model Compatibility: E-6013, Diameter: 1/8”, Weight: 1 lb, Package Type: Box No. 30405: Length: 14”, Model Compatibility: E-6013, Diameter: 1/8”, Weight: 5 lb, Package Type: Box No. 30410: Length: 14”, Model Compatibility: E-6013, Diameter: 1/8”, Weight: 10 lb, Package Type: Box No. 30450: Length: 14”, Model Compatibility: E-6013, Diameter: 1/8”, Weight: 50 lb, Package Type: Box No. 30550: Length: 14”, Model Compatibility: E-6013, Diameter: 5/32”, Weight: 50 lb, Package Type: Box No. 40201: Length: 14”, Model Compatibility: E-6013, Diameter: 5/64”, Weight: 1/2 lb, Package Type: Box No. 40202: Length: 14”, Model Compatibility: E-6013, Diameter: 5/64”, Weight: 1 lb, Package Type: Box

$153.88

FORNEY WELDING ELECTRODE -Mfg# 30410


FORNEY WELDING ELECTRODE -Mfg# 30410

AC/DC rod for milled steel. Shallow to medium penetration. Boxed. No.6013 1/8”x14” Welding Rod. 10 Lb. Cardboard Pkg. .

$27.99

Cast Iron Electrode


Cast Iron Electrode

Non-machinable cast iron specialty welding electrodes feature a non-conductive coating that is specially developed for welding dirty, heat-affected and oxidized cast iron. Ideally suited to cladding contaminated casting prior to joining with high nickel alloys. Typical applications include machine bases, pedestals, frames and housings where heat and machinability are not an important factor. Hardness: RC 39. Recommended polarity: DC reverse, straight or AC. No. 43400: Length: 14”, Model Compatibility: N/A, Diameter: 1/8”, Weight: 1/2 lb, Pkg Qty: 1, Package Type: Card

$19.88

Firepower 1440-0136 Welding Electrode Mild Steel


Firepower 1440-0136 Welding Electrode Mild Steel

Premium AWS CLASS E-6013. All position, all purpose electrode for most general repair work. Excellent for low heat applications. Offers good penetration with a stable arc. 1/810 lb.60,000 PSI

$28.36

cast steel welding electrode
REMTECH ROD – OXYGEN/ARC EXOTHERMIC CUTTING ELECTRODE

Weldcote Nickel 55 Cast Iron Welding Electrode Repair 1/8 1 Lb.


Weldcote Nickel 55 Cast Iron Welding Electrode Repair 1/8 1 Lb.

NI 55 is used for welding of cast irons to themselves as well as for joining cast irons to mild steels. IT is also employed for the repair of castings. The welds are moderately hard and require carbide tipped tools for machining. A preheat and inter pass temperature of not less than 350?F (175?C) is required during welding….

$17.49



Hot Max 23314 1/8-Inch 55-Percent Nickel Cast Iron ARC Welding Electrodes, 1/2-Pack


Hot Max 23314 1/8-Inch 55-Percent Nickel Cast Iron ARC Welding Electrodes, 1/2-Pack

Hot Max 55-Percent Iron Cast Nickel Stainless Steel Arc Welding Electrodes are all position rod designed for use on all grades of cast iron. Good for building up worn areas and has good machinability. 70,000 PSI tensile strength. Recommended Machine Polarity: AC or DCEN (DC-)….

$13.92

Hot Max 23313 3/32-Inch 55-Percent Nickel Cast Iron ARC Welding Electrodes, 1/2-Pack


Hot Max 23313 3/32-Inch 55-Percent Nickel Cast Iron ARC Welding Electrodes, 1/2-Pack

Hot Max 55-Percent Iron Cast Nickel Stainless Steel Arc Welding Electrodes are all position rod designed for use on all grades of cast iron. Good for building up worn areas and has good machinability. 70,000 PSI tensile strength. Recommended Machine Polarity: AC or DCEN (DC-)….

$11.95

Hot Max 23066 3/32-Inch 55-Percent Nickel Cast Iron ARC Welding Electrodes, 1 Plastic Tube


Hot Max 23066 3/32-Inch 55-Percent Nickel Cast Iron ARC Welding Electrodes, 1 Plastic Tube

Hot Max 55-Percent Iron Cast Nickel Stainless Steel Arc Welding Electrodes are all position rod designed for use on all grades of cast iron. Good for building up worn areas and has good machinability. 70,000 PSI tensile strength. Recommended Machine Polarity: AC or DCEN (DC-)….

$19.67

Industrial Machinery Repair: Best Maintenance Practices Pocket Guide (Plant Engineering)


Industrial Machinery Repair: Best Maintenance Practices Pocket Guide (Plant Engineering)

Industrial Machinery Repair provides a practical reference for practicing plant engineers, maintenance supervisors, physical plant supervisors and mechanical maintenance technicians. It focuses on the skills needed to select, install and maintain electro-mechanical equipment in a typical industrial plant or facility.The authors focuses on “Best Maintenance Repair Practices” necessary for maintenan…

$25.72

Rules of Thumb for Maintenance and Reliability Engineers


Rules of Thumb for Maintenance and Reliability Engineers

Rules of Thumb for Maintenance and Reliability Engineers will give the engineer the “have to have” information. It will help instill knowledge on a daily basis, to do his or her job and to maintain and assure reliable equipment to help reduce costs. This book will be an easy reference for engineers and managers needing immediate solutions to everyday problems. Most civil, mechanical, and electri…

$66.92

Metallic electrodes for cast-iron arc welding, (American institute of mining and metallurgical engineers. Technical publication no. 162. Class C, iron and steel)


Metallic electrodes for cast-iron arc welding, (American institute of mining and metallurgical engineers. Technical publication no. 162. Class C, iron and steel)

Us Forge 52332 Nickel Electrodes 1/8x14


Us Forge 52332 Nickel Electrodes 1/8×14

Highlights: Provides dense, strong, crack-resistant welds on all types of cast iron. With non-machinable deposit. For dirty and difficult-to-weld cast iron. Suitable for joining problem cast iron to steel. Used when nickel alloys fail to adhere. Weight: 1 lbs. Size: 1/8″ x 14″….

$5.43

Leave a Reply