Arc Welding Rod Numbers

Forney 31250 6011 1/8-Inch 50-Pound Welding Rod - Welding & Cutter Accessories


Forney 31250 6011 1/8-Inch 50-Pound Welding Rod – Welding & Cutter Accessories

Forney 31250 6011 1/8-Inch 50-Pound Welding Rod – The Forney 31250 6011 Mild Steel Super Sixty Welding Rod is a mild steel, all position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. 1/8-Inch ie.3.175 mm diameter rod. 50-Pound ie.22.7 kg. Tensile strength 60,000 PSI Amperage 80-130 amps AC, DCEP, DCEN Either Polarity. Typical Spec Example E6011: E is for electrode. The next two numbers ie.60, 70 or 80 indicates the tensile strength of the rod for example 60,000. The third number tells the welding position; ie.1=All position ie.2=Flat or Horizontal position ie.4=Flat, Horizontal, Overhead and Vertical Down position. The fourth number indicates the type of current to be used and coating of the rod; ie.0=Cellulose Sodium, with deep penetration, use Direct Current Electrode Positive ie.1=Cellulose Potassium, with deep penetration, use AC or Direct Current Electrode Positive, or Direct Current Electrode Negative ie.3=Titania Potassium, with light penetration, use AC or Direct Current Electrode Positive ie.8=Low Hydrogen, Iron Powder, with medium penetration use AC or Direct Current Electrode Positive. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. – Product Dimensions: 15.2 x 7.8 x 4.5 inches – Most orders ship in 3 to 4 business days.” – R1

$201.3

Arc Welding


Arc Welding

Arc Welding Photographic Print by . Product size approximately 18 x 24 inches. Available at Art.com. Embrace your Space – your source for high quality fine art posters and prints.

$32.99

arc welding rod numbers
What is the meaning of it. "7014" printed in the arc welding rods used in arc welding process of metal armor?

I just want to know about it because my instructor asked me to inspect everyting that was printed in welding rods and these numbers make sense printed.

The American Welding Society nomenclature to describe the type and characteristics of the stems. 70 describes the tensile strength of 70,000 psi. The third number indicates the position 701, can be used horizontally and vertically. Representative third set with the last issue is the family. Where there is a cellulose electrode penetration levels. Typically used for oil

Leave a Reply